Skip to content

Smarter Cameras. Safer Workplaces. Intelligent Operations.

AI Vision Intelligence & HSE Monitoring

Transform existing CCTV infrastructure into intelligent AI-powered monitoring systems for Health, Safety & Environment (HSE), workplace safety, security, and operational intelligence. Detect potential hazards, PPE violations, unsafe activities, and restricted-area intrusions with real-time alerts and actionable insights.

Solution blueprint

The problem

Why cameras rarely prevent anything

  1. 01Sites run hundreds of cameras with a handful of operators, so most footage is only watched after an incident.
  2. 02Safety and PPE checks depend on a supervisor being in the right place at the right time.
  3. 03Streaming video to a central cloud for analysis is costly in bandwidth and hard to justify on privacy grounds.
  4. 04Earlier video analytics raised so many false alarms that operators learned to ignore them.

How it is built

How the system is built

Inference runs on edge servers next to the cameras. Raw video stays on site under your existing retention rules; what travels to the central platform is an event — type, time, zone, confidence and an anonymised snapshot — for the control room to review and act on.

  1. Layer 1

    People and channels

    • Control-room event console
    • Mobile alerts for supervisors
    • HSE and operations dashboards
    • Reviewers who confirm events
  2. Layer 2

    Analytics

    • PPE and safety rules
    • Zone intrusion and line crossing
    • Occupancy and queue counts
    • Vehicle, plate and asset events
  3. Layer 3

    Edge and privacy

    • GPU inference servers on site
    • Face and body blurring by default
    • Only events and metadata leave the site
    • Retention limits per event type
  4. Layer 4

    Infrastructure

    • Existing IP cameras (ONVIF, RTSP)
    • Your video management system
    • Central event store and model registry
    • On-premises, or private cloud in the Kingdom

Capabilities

AI Vision Intelligence & HSE Monitoring

  • AI-Powered HSE Monitoring

    Turns the CCTV you already run on construction sites, manufacturing plants, warehouses, logistics yards, oil and gas facilities and commercial buildings into continuous HSE monitoring. Rules are set per zone and shift, and each event reaches the HSE team with an anonymised snapshot to confirm.

  • PPE Compliance Detection

    Detects missing helmets, high-visibility vests, gloves, safety glasses or fall-protection harnesses wherever a zone requires them, with rules matched to each area's PPE policy rather than one rule for the whole site.

  • Unsafe Behaviour & Hazard Detection

    Flags unsafe acts and conditions — working at height without protection, people inside the swing area of cranes or excavators, blocked walkways and emergency exits, spills on the floor — so supervisors can step in before an incident.

  • Restricted Area & Intrusion Monitoring

    Alerts when a person or vehicle enters a defined area or crosses a line outside permitted hours. Zones, schedules and sensitivity are set per camera, so a warehouse aisle and a perimeter fence behave differently.

  • Vehicle & Equipment Safety Monitoring

    Watches where people and moving equipment meet — forklifts, loaders and trucks — for pedestrians in vehicle lanes, near-misses and speeding in marked zones. At gates it reads plates and logs entry and exit against your lists of expected deliveries, contractors and blocked vehicles.

  • Real-Time Safety Alerts

    Sends events within seconds to the control-room console, supervisors' phones, Microsoft Teams, SMS or WhatsApp, with escalation when nobody acknowledges them in the agreed time.

  • HSE Dashboards & Compliance Analytics

    Shows PPE and zone compliance by area, shift and contractor, trends in unsafe events and response times, and exports for HSE reports, toolbox talks and audits — numbers and anonymised snapshots, not footage.

  • Visual Asset Inspection

    Flags visible defects such as leaks, corrosion, blocked exits or damaged racking from fixed cameras or scheduled captures, and routes them to maintenance for review.

  • Occupancy and queue counts

    Counts people in spaces and in queues at counters, gates and entrances, producing numbers rather than footage. The counts inform staffing, crowd safety and service levels.

  • Privacy by design

    Faces and bodies are blurred before any image leaves the edge, raw video stays on site, and event records expire on the schedule you set. Facial recognition is off, and is considered only where there is a clear lawful basis and an explicitly agreed scope.

How it works

From camera to action

  1. Camera feed on site
  2. Edge model detects event
  3. People blurred, metadata only
  4. Operator reviews and confirms
  5. Action logged and reported

Connects to

Systems it works with

  • IP cameras over ONVIF and RTSP
  • Milestone XProtect
  • Genetec Security Center
  • Other video management systems
  • Access control systems
  • PSIM and alarm platforms
  • Microsoft Teams and e-mail
  • SMS and WhatsApp alerts
  • IBM Maximo and SAP Plant Maintenance
  • HSE incident reporting systems

Where it runs

  • On-premises

    Models and data run on hardware in your own facilities. Nothing leaves your network unless you allow it.

  • Hybrid

    Sensitive workloads stay on-premises; less sensitive ones use private cloud capacity. You set the policy for what goes where.

What we measure

What we measure

Agreed with you during the site survey and reported against once the system is live — targets we track together, not results we promise.

  • 01

    Confirmed-event precision

    Share of alerts an operator confirms as real, per camera and rule — the measure that keeps alarm fatigue in check.

  • 02

    Time to response

    Time from an event being raised to someone acknowledging it and acting on it.

  • 03

    Safety compliance trend

    PPE and zone compliance rates per area over time, as a leading indicator for site safety.

  • 04

    Coverage and availability

    Share of in-scope cameras actually analysed, and edge-server availability during operating hours.

Indicative delivery path

Indicative delivery path

  1. 01

    2–3 weeks

    Site survey and use-case selection

    We review cameras, angles, lighting, network and video management, choose two or three use cases, and agree privacy rules, retention and measures with your security, HSE and legal teams.

  2. 02

    4–6 weeks

    Proof on selected cameras

    We install an edge server for a handful of cameras, tune the models to your conditions and measure precision against events your operators review.

  3. 03

    6–10 weeks

    Site roll-out

    We extend to the agreed cameras, connect alerts to the control room and access control, and train operators and supervisors.

  4. 04

    Ongoing

    Operate and improve

    We monitor model drift, camera health and alert quality, retrain where conditions change, and report against the measures.

Durations are indicative and depend on scope, data and integrations.

Questions

AI Vision Intelligence & HSE Monitoring

Do we need new cameras?

Usually not. Most modern IP cameras that provide an RTSP or ONVIF stream will work, provided the angle, resolution and lighting suit the task. The site survey tells you, camera by camera, which use cases are realistic and where a new position or lens would help.

Does this include facial recognition?

No, not by default. The standard design blurs faces and bodies, and detects events rather than identifying people. Facial recognition is considered only where there is a clear lawful basis, an explicitly agreed and documented scope, and sign-off from your legal and compliance teams.

What leaves the site?

Only events and their metadata: what happened, where, when and with what confidence, plus an anonymised snapshot if you want one. Raw video stays on your recorders under your existing retention. This supports your obligations under the Personal Data Protection Law but is not the whole of compliance, so we work with your compliance team on notices, purposes and retention periods.

How do you deal with false alarms?

Each rule is tuned per camera during the proof phase, and precision is measured against events your operators confirm. A rule that cannot reach the agreed precision is not switched on. After go-live, operator feedback on every alert feeds retraining.

Does AI HSE monitoring replace our safety officers?

No. It extends their reach across every camera on the site, around the clock, and brings the events that need attention to them. Decisions, corrective actions and incident reporting stay with your HSE team, which also uses the compliance data for toolbox talks, audits and contractor reviews.

Have a process that should run itself?

Tell us about it. We will help you work out whether AI is the right answer, what it would take, and what it should return.

Newsletter

Practical AI, in your inbox.

Real use cases, Saudi regulations and what works in Arabic — once or twice a month. No spam; unsubscribe any time.

We’ll e-mail you to confirm. Unsubscribe any time — see our privacy policy.